Magic Chef
No Power to Range or Failed Control Board
Clock and display are blank; oven and cooktop do not work.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped breaker or blown fuse, Loose power cord connection, Failed terminal block, Dead EOC with open internal fuse
How to Fix / Troubleshooting
Safety first: Turn off the breaker before inspecting electrical connections. Use caution around 240V circuits.
Steps:
- Check breaker: Verify the range breaker is ON and not tripped. Reset if necessary.
- Inspect cord and outlet: Pull the range out and inspect the cord and outlet for damage. Replace if burned or loose.
- Terminal block: Remove the rear cover and inspect the terminal block. Tighten loose screws and replace a melted block.
- Control board: If power is present at the terminal block but the display is dead, the EOC may have failed. Replace the EOC after confirming incoming voltage.
Warning: If you are not experienced with electrical testing, contact a professional.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Electronic Oven Control Board (EOC) or Power Cord/Terminal Block
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements