Magic Chef Door Hinge or Gasket Failure

Oven door will not close fully or has a gap; heat escapes around the door.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Bent or worn door hinges, Broken hinge springs, Damaged or compressed door gasket, Misaligned door due to impact

How to Fix / Troubleshooting

Safety first: Ensure the oven is cool before working on the door.

Steps:

  • Inspect gasket: Check the door gasket around the frame for tears, gaps, or hardened sections. Replace if damaged.
  • Check hinges: Open the door and inspect hinges for bending or broken springs. On many Magic Chef models, the door can be removed by opening to the broil stop position and lifting off the hinges.
  • Replace hinges: Remove the oven door, then remove the side panels or access screws to replace the hinge assemblies. Install new OEM hinges in pairs for even closure.
  • Re-seat door: Reinstall the door fully onto the hinge arms and test closure.

Note: A poor door seal can cause temperature issues and overheat the control panel.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

Oven Door Hinges and Door Gasket
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements