Magic Chef Improper Gas Flow to Surface Burner

Surface burner lights but flame is very weak or uneven.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Partially clogged burner ports, Incorrect or partially closed gas shutoff valve, Wrong orifice for gas type (NG vs LP), Regulator not set for correct gas type

How to Fix / Troubleshooting

Safety first: Turn off all burners and allow them to cool. If converting gas type, shut off gas and follow conversion kit instructions exactly.

Steps:

  • Clean burner: Remove burner cap and head. Clean ports with a soft brush and warm soapy water. Dry thoroughly before reassembly.
  • Check shutoff: Verify the gas shutoff valve to the range is fully open.
  • Gas type: Confirm the range is configured for your gas type (natural gas or LP). Check the regulator cap orientation and orifice markings. If incorrect, install the proper Magic Chef conversion kit.
  • Adjust flame: Some models have low-flame adjustment screws in the valve stem. Adjust to achieve a stable blue flame.

Warning: Gas conversions should be performed by a qualified technician to ensure safe operation.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

Surface Burner Head and Orifice
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements