Maytag
Control Not Sending Bake/Broil Signal
Clock and display work but oven will not start (no heat, no relay click)
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
EOC relay failure, Child lock or Sabbath mode active, Open door switch, Failed selector or keypad
How to Fix / Troubleshooting
Safety first: Ensure the oven is empty and cool before testing.
- Check modes: Verify that control lock or Sabbath mode is not enabled. Disable according to the user manual.
- Door switch: Ensure the oven door is fully closed and the door switch is operating. Test the switch with a multimeter and replace if faulty.
- Listen for relays: When starting bake, listen for a click from the control. No click may indicate a bad relay or control board.
- Test output (advanced): With proper safety, check for voltage at the bake and broil element terminals when commanded. If no voltage and wiring is intact, replace the EOC.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Electronic Oven Control (EOC) Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements