F5-1
Maytag
Oven Door Lock Switch Failure
Display shows F5-1, oven door will not lock or unlock during self-clean
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed door lock switch, Misaligned door latch, Broken latch actuator, Wiring issue between lock assembly and EOC
How to Fix / Troubleshooting
Safety first: Turn off power and allow the oven to cool completely before working on the door lock.
- Check door alignment: Ensure the oven door closes fully and evenly. Adjust hinges if the door is sagging.
- Access lock assembly: Remove the rear panel or top panel (depending on model) to access the door lock motor and switch assembly.
- Inspect linkage: Look for bent or broken latch arms and plastic actuators. Replace the door lock assembly if damaged.
- Test switch continuity: With a multimeter, test the lock switch contacts while manually moving the latch. Replace the lock assembly if the switch does not change state.
- Check wiring: Verify the harness from the lock assembly to the EOC is intact and connectors are tight.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Oven Door Lock Motor and Switch Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements