Display shows F94, oven door lock error after self-clean

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Lock switch not changing state, Warped latch from high heat, Wiring issue, EOC misreading lock status

Safety first: Disconnect power and allow oven to cool.

Manual unlock: Access the latch from the top or rear and manually move it to unlock the door.
Test lock switch: With a multimeter, verify that the lock switch opens and closes as the latch moves. Replace the lock assembly if the switch is faulty.
Inspect wiring: Check for loose or corroded connectors between the lock and EOC.
Replace EOC if necessary: If the lock assembly and wiring are good, the control board may be misinterpreting the lock status.

Hard 4/5

Oven Door Lock Assembly

Check Price on Amazon

We may earn a commission from links on this page.