Induction cooktop shows E8 and will not heat on the affected zone.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Turn off power at the breaker. Do not operate the cooktop with suspected internal shorts.
- Visual inspection (for technicians):
- Remove the cooktop and access the underside.
- Inspect the induction coil for burn marks, cracks, or detached leads.
- Check the wiring harness from the coil to the power module for discoloration or melted insulation.
- Do not bypass safety: Do not attempt to jumper or bypass the coil or power components; this can cause fire or electric shock.
Resolution typically requires replacing the affected induction coil assembly or power module. This is a high-voltage repair and should be handled by a qualified technician.
Repair Difficulty
Required Part
We may earn a commission from links on this page.