E6
Monogram
Cooktop Internal Overheat or Fan Failure
Induction cooktop displays E6 and may shut down all zones.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed cooling fan, Blocked air intake or exhaust, Overheated power electronics, Faulty temperature sensor on heat sink
How to Fix / Troubleshooting
Safety first: Turn off all burners and disconnect power. Components may be very hot.
- Allow cooling: Let the cooktop cool for at least 30 minutes. Restart to see if E6 clears.
- Check cabinet ventilation: Ensure there is adequate clearance and no items stored directly under the cooktop blocking airflow.
- Listen for fan: When any zone is on, you should hear the cooling fan. If silent, the fan may be failed or obstructed.
- Service required: Replacement of the cooling fan assembly or induction module is typically required and should be done by a qualified technician.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Cooktop Cooling Fan
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements