E7
Monogram
Cooktop Glass Temperature Sensor Fault
Induction cooktop displays E7 and affected zone will not operate.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Open or shorted glass surface sensor, Damaged sensor wiring, Faulty sensor input on induction module, Physical damage to glass near sensor
How to Fix / Troubleshooting
Safety first: Disconnect power before accessing internal components. Handle glass carefully to avoid breakage.
- Visual inspection: Check the glass surface for cracks or impact damage near the affected zone.
- Sensor check: Access the underside of the cooktop and locate the temperature sensor for the affected zone. Inspect wiring and connector for damage.
- Resistance test: With a multimeter, measure sensor resistance and compare to service manual specifications. Replace if open, shorted, or out of range.
- Module replacement: If the sensor and wiring are good, the induction module may have a defective sensor input and require replacement.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Glass Cooktop Temperature Sensor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements