Monogram
Oven Door Alignment or Hinge Failure
Oven door does not close fully or has a gap, causing heat to escape on a Monogram range.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Bent or worn door hinges, Deformed door gasket, Loose door hinge screws, Warped door frame from repeated high-heat cycles
How to Fix / Troubleshooting
Safety first: Ensure the oven is cool before adjusting the door.
- Inspect hinges: Open the door and check hinges for bending or looseness. Tighten hinge screws on the door and frame.
- Check gasket: Inspect the door gasket for tears, gaps, or flattening. Replace if it does not seal evenly around the door.
- Door removal: Many Monogram doors can be removed by opening to the broil stop position and lifting off the hinges. Remove and inspect for damage, then reinstall carefully.
- Replace hinges: If the door still does not close properly, replace the oven door hinge assemblies as a set.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Door Hinge
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements