Main oven not heating at all, fan runs but no heat

Safety: Isolate the cooker from mains before removing any panels or elements.

• Check function: Select a fan oven mode and set temperature high. If the fan runs but no warmth is felt after 10 minutes, the fan element is suspect.
• Visual inspection: Remove the oven back panel inside the cavity (usually 4 screws). Inspect the circular element around the fan for cracks, blisters, or burn marks.
• Test element: Disconnect the two element terminals and measure resistance. A typical New World fan element reads 20–40 Ω. If open circuit, replace the element.
• Inspect connectors: Check for heat‑damaged spade terminals. Replace any discoloured or loose connectors and ensure a tight fit on the new element.
• Reassemble and test: Refit the rear panel, restore power, and test heating. If still no heat and the element tests good, the oven relay on the clock/power board may have failed and the board will need replacement.