New World Worn or Damaged Door Hinges / Hinge Runners

Oven door will not close properly or drops open

Advertisements

Possible Causes

Worn hinge springs, bent hinge arms, damaged hinge runners in cabinet, loose hinge screws

How to Fix / Troubleshooting

Safety: Isolate from mains to avoid accidental heating while working on the door.

  • Inspect hinges: Open the door and check for excessive side play or sagging. Look at the hinge arms and runners for distortion.
  • Remove door: Many New World ovens have clip‑on hinges. Open the door fully, flip the hinge locks, then partially close and lift the door off.
  • Check runners: Inspect the hinge runners fixed to the oven cavity for cracks or looseness. Tighten screws or replace runners if damaged.
  • Replace hinges: If the door does not spring closed or sits low, replace both hinges as a pair with the correct New World parts.
  • Refit and test: Refit the door onto the runners, close the hinge locks, and check closure and seal contact all around.
Advertisements

Repair Difficulty

Easy 2/5

Required Part

Oven Door Hinges and Hinge Runners
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements