F0
RCA
General Control Board or Keypad Error
Display shows F0 and oven controls may be unresponsive or intermittent.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose keypad ribbon connection, Failing electronic oven control, Static or surge event corrupting control logic, Shorted keypad
How to Fix / Troubleshooting
Safety first: Disconnect power before accessing the control panel.
- Reset control: Turn off the breaker for 5–10 minutes, then restore power. If F0 returns immediately, proceed with inspection.
- Inspect keypad ribbon: Remove the rear control cover and carefully unplug and reinsert the keypad ribbon cable. Look for corrosion or damage on the contacts.
- Check for visible damage: Examine the electronic oven control board for burnt components or discoloration. Any visible damage indicates the board should be replaced.
- Replace faulty component: If reseating the ribbon does not resolve the issue, replace the control panel/touchpad assembly or the electronic oven control board, depending on which is determined faulty.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Electronic Oven Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements