SMEG Door Hinge or Hinge Receiver Failure

Oven door does not close properly or drops open

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Worn door hinges, Bent hinge arms, Damaged hinge receivers in oven frame, Loose mounting screws

How to Fix / Troubleshooting

Safety first: Ensure the oven is cool. Support the door when removing to avoid injury.

Steps:

  • Inspect hinges: Open the door fully and check for excessive play or sagging.
  • Remove door: Engage the hinge locks (if present) and lift the door off the hinges according to the SMEG manual.
  • Check receivers: Inspect the hinge receivers in the oven frame for wear or damage.
  • Replace hinges: Install new OEM SMEG hinges and/or receivers. Tighten all mounting screws.
  • Test closure: Refit the door and check that it closes firmly and evenly.

Warning: A misaligned door can cause heat loss and damage to surrounding cabinets.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

Oven Door Hinge Set
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements