Tecnogas Failed Bake Heating Element Circuit

Electric oven does not heat on bake, but broil still works.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Open bake heating element, Burnt wire at element terminal, Faulty bake relay on control board

Safety first: Disconnect power before touching any wiring.

Steps:

Visually inspect the lower bake element for breaks or burn marks.
Remove the mounting screws and gently pull the element forward to inspect the terminals and wiring.
Test the element for continuity; replace if open.
If the element is good, check for burnt wires and repair as needed. Persistent no-bake with good wiring suggests a bad bake relay on the EOC.

Medium 3/5

Bake Heating Element

Check Price on Amazon

We may earn a commission from links on this page.