Tecnogas Failed Broil Heating Element Circuit

Electric oven does not heat on broil, but bake works normally.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Open broil element, Loose or burnt broil wiring, Faulty broil relay on control board

Safety first: Disconnect power.

Steps:

Inspect the upper broil element for visible damage.
Remove mounting screws and pull the element forward to check wiring.
Test continuity; replace the broil element if open.
Repair any burnt connectors. If the element and wiring are good, the broil relay on the EOC may be defective.

Medium 3/5

Broil Heating Element

Check Price on Amazon

We may earn a commission from links on this page.