Tecnogas Misaligned or Worn Oven Door Hinges / Deformed Door

Oven door does not close fully or has a gap, causing heat to escape.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Bent door hinges, Worn hinge springs, Loose hinge mounting screws, Warped oven door frame

Safety first: Ensure the oven is cool before adjusting the door.

Steps:

Open the door fully and inspect the hinges on both sides for bending or damage.
Check that the hinge arms are fully seated in the oven body slots.
Tighten any loose hinge mounting screws.
If the door sags or does not spring closed, replace the hinge pair with Tecnogas-specific hinges.

Medium 3/5

Oven Door Hinge Set

Check Price on Amazon

We may earn a commission from links on this page.