Teka Faulty Energy Regulator / Thermostat

Electric ceramic hob zone cycles on and off too quickly, not reaching set temperature.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Worn simmerstat (energy regulator), Loose sensor capillary, Incorrect wiring after previous repair

Safety first: Disconnect from mains before accessing controls.

Observe behavior: Note if the issue affects only one zone or all zones controlled by a specific knob.
Inspect regulator: Remove the control panel and check the energy regulator for signs of overheating or damage.
Check wiring: Verify that wires are correctly connected according to the wiring diagram.

When to call a technician: Replacing an energy regulator involves mains wiring and should be done by a qualified person.

Medium 3/5

Energy Regulator (Simmerstat)

Check Price on Amazon

We may earn a commission from links on this page.