Teka Single Radiant Element Failure

Electric ceramic hob zone does not heat at all, other zones work.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Open-circuit heating element, Burnt wiring to element, Failed zone relay on power board

Safety first: Disconnect from mains and allow the hob to cool completely before opening.

Visual check: Remove the hob and bottom cover. Inspect the affected element for visible breaks or burn marks.
Check connectors: Ensure all spade terminals to the element are tight and not oxidized.
Continuity test: Use a multimeter to check the element. If open, it must be replaced.

When to call a technician: If wiring and element are intact, the control board relay may be faulty and should be replaced by a professional.

Medium 3/5

Radiant Heating Element

Check Price on Amazon

We may earn a commission from links on this page.