Ceramic hob shows Er02 and zones shut off during cooking.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Turn off all zones and allow the hob to cool completely before further use.
- Remove cookware: Take pots off the affected zone and let the glass cool.
- Check ventilation: Ensure there is adequate airflow under the hob and that vents are not blocked.
- Avoid oversize pans: Use cookware that matches the zone size to prevent overheating the glass.
When to call a technician: If Er02 appears quickly at low power, the temperature sensor or control board may be faulty and should be tested and replaced.
Repair Difficulty
Required Part
We may earn a commission from links on this page.