Teka Electrical Short or Earth Leakage

Hob trips the household circuit breaker or RCD when turned on.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Damaged power cord, Moisture inside hob, Shorted heating element or IGBT, Incorrect wiring to supply

Safety first: Do not repeatedly reset a tripping breaker. Risk of fire or electric shock.

Inspect cord and plug: Look for visible damage. Replace if compromised.
Allow drying: If the issue started after a spill, disconnect power and allow the hob to dry for 24 hours.
Check wiring: Have a qualified person verify that the hob is wired correctly at the terminal block.

When to call a technician: Persistent tripping indicates an internal fault that must be diagnosed with insulation and leakage tests.

Professional Required 5/5

Main Power Board

Check Price on Amazon

We may earn a commission from links on this page.