Oven light and display work, but oven will not start any cooking cycle (no heat, no relay click).

Safety first: Disconnect power before accessing internal components like fuses or thermostats.

• Check lock modes: Verify that child lock or Sabbath mode is not active. Refer to the user manual to disable these features.
• Door switch test: Open and close the door; the oven light should respond. If not, the door switch may be faulty.
• Listen for relays: Start a bake cycle and listen for a click from the control board. No click may indicate a failed relay or open safety device.
• Inspect thermal fuse (advanced): Access the rear or top of the oven to locate any thermal fuse or high-limit thermostat. Test for continuity; replace if open.

If safety devices and door switch are good, the main control board may not be sending power to the heating circuits and may require replacement.