Thor Kitchen
No Power to Control or Blown Internal Fuse
Clock and display are blank; range appears completely dead.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped breaker or blown fuse in home, Loose power cord or terminal block, Blown internal line fuse, Failed EOC power supply
How to Fix / Troubleshooting
Safety first: Verify the breaker is off before accessing the rear of the range.
- Check household power: Confirm the range's breaker is ON and not tripped. Reset if necessary.
- Inspect cord and terminal block: Ensure the power cord is plugged in securely and the terminal block connections are tight and undamaged.
- Internal fuse: Some Thor Kitchen models include an internal line fuse on the control board. With power disconnected, locate and test the fuse for continuity. Replace the line fuse with the exact same rating if blown, and investigate the cause.
- Control board: If power is present at the terminal block but the display remains dead, replace the electronic oven control board.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Electronic Oven Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements