Clock and display work, but oven will not start when Start is pressed.

Safety first: No internal work is needed initially; follow programming steps first. Disconnect power before accessing switches or controls.

Steps to check and correct:

• Check control lock: Look for a lock icon on the display. Disable control lock by holding the designated key combination (refer to user manual).
• Reprogram cycle: Select a standard bake temperature and press Start firmly. Ensure the door is fully closed.
• Test door switch: If the oven light does not change when opening/closing the door, the door switch may be faulty and should be tested and replaced.
• Test Start key: If other keys respond but Start does not, the touchpad may be failing and require replacement.

When to call a technician: If door switch or touchpad replacement is needed, or if the control does not respond after these checks, contact a service technician.