Viking oven display shows F10 and the oven may not respond to temperature changes.

Safety first: Turn off power at the breaker before removing the control panel.

Steps to check and correct:

• Check for stuck buttons: With power off, press each button on the control panel several times to feel for any that are sticking or not returning properly.
• Clean the surface: Wipe the control panel with a slightly damp cloth and mild detergent. Do not spray cleaner directly onto the panel; spray onto the cloth instead.
• Dry out moisture: If the error appeared after a spill, allow the control area to dry for several hours. You can leave the oven door open and the control panel slightly loosened (with power off) to aid drying.
• Inspect ribbon cable: Remove the control panel and inspect the keypad ribbon cable for damage or corrosion. Reseat the cable firmly.
• Replace keypad/UI: If a specific key remains unresponsive or F10 persists, replace the touchpad or user interface assembly.

When to call a technician: If disassembly of the front panel is required or if the keypad assembly must be replaced, professional service is recommended.