Cooktop displays E2 and shuts down the affected burner

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Overheated glass surface, blocked ventilation, failed temperature sensor on burner, control misreading temperature

Safety first: Turn off all burners and allow the cooktop to cool completely.

Remove hot cookware: Take pans off the affected zone and wait until the glass is cool to the touch.
Check ventilation: Ensure there is adequate airflow under and around the cooktop and that vents are not blocked.
Reset power: After cooling, reset power at the breaker. If E2 returns immediately on a cool surface, the sensor or burner module may be faulty.
Replace burner module: Access the underside of the cooktop and replace the affected burner or sensor assembly.

Medium 3/5

Radiant Element with Temperature Limiter

Check Price on Amazon

We may earn a commission from links on this page.