F6E0
Whirlpool
Communication error between user interface and control board
Display shows F6E0, oven controls unresponsive or erratic
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose or damaged harness between UI and main control, failed user interface board, failed main control board
How to Fix / Troubleshooting
Safety first: Disconnect power before removing control panels.
- Reseat connectors: Remove the control panel and reseat all harness connectors between the touch panel and the main control board.
- Inspect for damage: Look for burnt spots, corrosion, or broken pins on the boards and connectors.
- Isolate failure: If possible, follow the tech sheet for your model to run a UI test. If UI fails, replace the user interface board. If UI passes but F6E0 persists, replace the main control board.
- Reassemble and test: Restore power and verify normal operation of all buttons and display.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
User Interface Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements