F7E2
Whirlpool
Convection fan or convection circuit failure
Display shows F7E2, convection fan or convection bake not working properly
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed convection fan motor, obstructed fan blade, open convection element, wiring issue to convection components
How to Fix / Troubleshooting
Safety first: Disconnect power before accessing rear oven components.
- Check fan operation: Start a convection bake cycle and listen for the fan. If it does not run, access the fan from the rear and test the motor for continuity. Replace if open or seized.
- Inspect fan blade: Ensure the fan blade is not rubbing against the shroud or obstructed by debris.
- Test convection element: If equipped, test the convection element for continuity and replace if open.
- Check wiring and control: Inspect harnesses and replace the control board if it is not sending power to the fan/element.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Convection Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements