Display shows F8E1, oven over-temperature condition detected

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Stuck relay on control board, shorted temperature sensor, miscalibrated control, wiring short to sensor circuit

Safety first: Turn off power and allow the oven to cool completely.

Sensor test: Test the oven temperature sensor resistance at room temperature (~1080 Ω). Replace if out of range.
Inspect wiring: Check for shorts between sensor wires and chassis. Repair any damaged insulation.
Control board: If sensor and wiring are good, the control's relay may be stuck on, causing overheating. Replace the control board.
Calibration: After replacement, verify oven temperature with an oven thermometer and adjust calibration if your model allows.

Hard 4/5

Electronic Oven Control Board (EOC)

Check Price on Amazon

We may earn a commission from links on this page.