F9E2
Whirlpool
Door latch stuck locked
Display shows F9E2, oven door will not unlock after self-clean
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Seized latch motor, failed latch switch, control not receiving unlock signal, thermal distortion of latch components
How to Fix / Troubleshooting
Safety first: Turn off power and allow the oven to cool completely before attempting to unlock.
- Cool down: Wait until the oven is fully cool; the door will not unlock if the control senses high temperature.
- Manual release: Access the latch from the top or rear and manually move the latch arm to the unlocked position.
- Inspect and test latch: Check for heat-damaged plastic or bent metal. Test the latch motor and switch with a multimeter. Replace the latch assembly if defective.
- Control check: If the latch assembly is good, the control board may not be sending the unlock command and may require replacement.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Oven Door Latch Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements