Whirlpool
Door hinge or gasket failure
Oven door will not close fully or has a gap, heat escapes
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Bent or worn door hinges, broken hinge springs, deformed door gasket, misaligned door
How to Fix / Troubleshooting
Safety first: Ensure the oven is cool before working on the door.
- Inspect hinges: Open the door and check hinges for bending or looseness. If the door drops or does not stay at angles, hinges may be worn.
- Check gasket: Inspect the oven door gasket for tears, flattening, or missing sections. Replace if damaged.
- Hinge replacement: Remove the door per Whirlpool instructions (usually by opening to a specific angle and lifting off). Replace both hinges as a set to ensure even operation.
- Reinstall and test: Reinstall the door and verify it closes tightly and seals all around.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Door Hinge
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements