Wolf
User Interface or Clock Circuit Failure
Wolf range clock and timer functions do not work, but oven and burners operate normally.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed clock/timer section of control board, Damaged UI buttons, Loose ribbon cable to display
How to Fix / Troubleshooting
Safety first: Disconnect power at the breaker before removing the control panel.
- Power reset: Turn the breaker off for 5 minutes, then back on to reset the clock circuit.
- Inspect ribbon cable: Remove the control panel and check the ribbon cable between the display and main board. Reseat firmly.
- Check buttons: Press each button and feel for a positive click. If some buttons are stuck or unresponsive, the UI board may need replacement.
- Board replacement: If the display remains nonfunctional, replace the control/clock board with the correct Wolf part.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Electronic Oven Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements