Gas oven on Zline range will not ignite; you hear clicking but no flame.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Turn oven OFF. If you smell gas, shut off the gas supply and ventilate immediately.
- Check gas supply: Confirm that other gas burners work. If cooktop works but oven does not, the oven gas valve or safety system may be at fault.
- Observe igniter: For hot surface igniter models, the igniter should glow bright orange. A weak or dull glow often cannot open the gas valve and must be replaced. For spark models, verify a strong spark at the oven burner.
- Clean burner: Remove the oven bottom panel to access the burner. Clean burner ports with a brush to remove debris that may block gas flow.
- Professional testing: Gas valve and safety circuits should be tested by a qualified technician using proper instruments.
When to call a technician: Oven gas components are safety-critical; if cleaning and basic checks do not restore ignition, schedule professional service.
Repair Difficulty
Required Part
We may earn a commission from links on this page.