AEG Ice Production Failure

Ice maker not producing ice (on models with built-in ice maker).

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Water supply turned off or low pressure, Frozen water line, Faulty water inlet valve, Defective ice maker module

How to Fix / Troubleshooting

Safety first: Turn off the water supply and unplug the refrigerator before working on the water system.

Water supply:

  • Confirm the water tap to the refrigerator is fully open.
  • Check the supply hose for kinks or crushing.
  • Dispense water (if your model has a dispenser) to verify flow; poor flow indicates a supply or filter issue.

Ice maker checks:

  • Ensure the ice maker is switched ON and that the ice bin is correctly positioned.
  • Inspect the fill tube for ice blockage; if frozen, thaw with warm air or water (with power off).
  • If water does not enter the ice tray during a cycle, the water inlet valve may be faulty and should be replaced.

Note: After any repair, allow up to 24 hours for ice production to resume.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

Water Inlet Valve
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements