E4
Amana
Defrost Circuit Error
Display shows E4; refrigerator may not defrost properly, leading to frost buildup and poor cooling.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Open defrost heater, Failed defrost thermostat, Defective defrost relay on control board, Wiring harness failure
How to Fix / Troubleshooting
Safety first: Always unplug the refrigerator before testing or replacing defrost components.
- Manual defrost: Unplug the unit and leave doors open for 24 hours to melt ice. This will temporarily restore airflow.
- Access defrost components: Remove the freezer back panel to expose the evaporator, heater, and thermostat.
- Test heater and thermostat: Use a multimeter to check continuity of the heater and thermostat (thermostat should be closed when cold). Replace any open components.
- Check control output (advanced): With the unit in a forced defrost mode (per tech sheet), verify that the control board sends power to the heater. If not, the board may be defective.
- Reassemble and monitor: After replacing parts, reassemble, restore power, and monitor for normal frost pattern and absence of the E4 code.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Defrost Thermostat
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements