E8
Amana
Condenser Fan Motor Error
Display shows E8; condenser fan may not run and refrigerator may overheat or run loudly.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed condenser fan motor, Obstruction in fan blades, Faulty fan relay on control board, Loose wiring to fan
How to Fix / Troubleshooting
Safety first: Unplug the refrigerator before accessing the rear compartment or touching the fan.
- Access condenser fan: Pull the refrigerator away from the wall and remove the lower rear access panel.
- Inspect fan: Check for debris, dust, or objects blocking the fan blades. Spin the blades by hand; they should move freely.
- Clean condenser area: Use a vacuum and brush to remove dust from the condenser coils and fan area.
- Test fan motor: With power restored (use caution), observe whether the fan runs when the compressor is on. If not, unplug again and test motor resistance. An open winding indicates a bad motor.
- Replace fan motor: Disconnect wiring, remove mounting screws, and install a new condenser fan motor if defective.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Condenser Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements