Amana Freezer Temperature Sensor Fault

Display shows F2; freezer temperature control is inaccurate or unstable.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Open/shorted freezer thermistor, Loose connector, Damaged harness near evaporator

Safety first: Unplug the refrigerator before removing freezer panels.

Access freezer thermistor: Remove shelves and the rear interior panel to reach the evaporator area.
Test thermistor: Disconnect and measure resistance; compare to spec. Replace if readings are abnormal.
Inspect wiring: Look for ice damage or chafing on wires. Repair or replace harness as needed.
Reassemble: Reinstall the panel, restore power, and verify that F2 clears and freezer temperature stabilizes.

Hard 4/5

Freezer Thermistor

Check Price on Amazon

We may earn a commission from links on this page.