Interior light not working but refrigerator otherwise cools normally

Safety: Unplug the appliance before replacing bulbs or LED modules.

Steps:

• 1. Check bulb/module: Remove the light cover and inspect the bulb or LED module. Replace with the correct type if visibly damaged or darkened.
• 2. Test door switch: For plunger switches, press and release while listening for a click. Replace if stuck or if the light does not respond.
• 3. Inspect wiring: Ensure the light connector is firmly seated and wires are intact.
• 4. Control board: If a known-good bulb and switch do not restore light, the control board’s light circuit may be faulty and require replacement.