Refrigerator runs constantly and never cycles off, but temperatures are only slightly cool

Safety first: Unplug the refrigerator before cleaning coils or working near the compressor.

Steps:

• Clean condenser coils: Access the coils at the back or underneath. Use a coil brush and vacuum to remove dust and pet hair.
• Check condenser fan: Ensure the fan near the compressor runs whenever the compressor is on. Replace the fan motor if it does not run and wiring is intact.
• Inspect door gaskets: Close a sheet of paper in the door and pull it out. If it slides easily all around, the gasket may be worn or the door misaligned. Adjust hinges or replace gaskets.
• Provide ventilation: Ensure there is adequate clearance around the refrigerator per the installation manual. Move it slightly forward if tightly enclosed.

Note: After cleaning and adjustments, monitor temperatures for 24 hours.