Avanti No Ice Production

Ice maker not making ice, ice bin empty after 24–48 hours.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Water supply off or low pressure, Clogged water filter, Failed water inlet valve, Faulty ice maker module

How to Fix / Troubleshooting

Safety: Turn off the ice maker and shut off water supply before disconnecting lines.

  • 1. Verify water supply: Ensure the shutoff valve is open and the supply line is not kinked.
  • 2. Check ice maker arm/switch: Make sure the ice maker is turned on and the bail arm is in the down position.
  • 3. Replace water filter: If equipped, install a new water filter and run several cups of water through the dispenser to purge air.
  • 4. Test inlet valve: Use a multimeter to check coil resistance. If open, replace the water inlet valve.
  • 5. Inspect ice maker: If the mold never fills with water but the valve is good, the ice maker assembly may not be sending a fill signal and should be replaced.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Ice Maker Assembly
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements