Beko
Relay Operation or Control Board Issue
Clicking or ticking noise from the control panel or rear electronics area.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Normal relay switching,Control board repeatedly trying to start compressor,Power supply instability,Faulty relay on PCB
How to Fix / Troubleshooting
Safety first: Unplug the refrigerator before removing any covers.
Step-by-step:
- Determine if normal: Occasional clicks as the compressor or defrost cycle starts/stops are normal. Rapid, repeated clicking is not.
- Check power supply: Ensure the outlet is stable and not shared with high-draw appliances.
- Monitor performance: If cooling is normal and clicks are infrequent, no action may be needed.
- Investigate further: If cooling is poor and clicking is frequent, the control board or compressor circuit may be failing and should be inspected by a technician.
Note: Do not attempt to repair relays on the PCB yourself; the board should be replaced as a unit.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Main Control Board (PCB)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements