Beko
User Interface / Display Failure
Display panel not responding to touch or buttons, but fridge still cools.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Moisture ingress into touch panel,Loose display cable,Defective display PCB,Control board communication fault
How to Fix / Troubleshooting
Safety first: Unplug the refrigerator before removing the display panel.
Step-by-step:
- Dry panel: If the panel has been exposed to cleaning sprays or moisture, wipe it dry and allow several hours with the door open (fridge unplugged) for moisture to evaporate.
- Inspect cable: Remove the display trim and check that the ribbon cable is firmly seated.
- Power reset: After reassembly, plug in and see if the panel responds.
Action: If still unresponsive, the display board may need replacement. Ensure you obtain the exact part for your Beko model.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Display Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements