E15
Beko Display Board Communication Fault

Display shows E15 and the refrigerator may not respond to user inputs or may have display anomalies.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Loose or damaged cable between display and main PCB,Moisture ingress into display panel,Defective display PCB,Faulty main control board communication driver

How to Fix / Troubleshooting

Safety first: Unplug the refrigerator before removing the display panel.

Step-by-step:

  • Inspect display area: Check for signs of condensation or liquid spills around the control panel.
  • Remove display trim: Carefully unclip or unscrew the display panel. Do not pull hard; there will be a cable attached.
  • Check cable: Ensure the ribbon or harness is fully seated at both the display and cabinet ends. Look for kinks or corrosion.
  • Dry moisture: If condensation is present, gently dry the area with a soft cloth and allow the panel to air dry completely before reassembly.
  • Reassemble and test: Refit the panel, plug in the fridge, and check if E15 clears.

Note: If the error persists, either the display board or main PCB may need replacement. This is best confirmed by a technician with access to spare parts.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

Display Control Board
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements