Display shows EF and the fan may run erratically or not at all, causing uneven temperatures.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Disconnect power before touching any fan assembly.
Identify which fan:
- Listen for noise or lack of airflow from the freezer (evaporator fan) and from the back bottom (condenser fan) when the unit is running.
Clear obstructions:
- For the evaporator fan, remove the freezer rear panel and clear any ice or debris.
- For the condenser fan, remove the rear lower panel and clean dust and lint from the blades and surrounding area.
Check wiring:
- Ensure the fan connectors are fully seated and wires are not damaged.
Note: If the fan does not run after clearing and reseating, the motor or control board may be defective. Voltage testing should be done by a qualified technician.
Repair Difficulty
Required Part
We may earn a commission from links on this page.