E14

Brandt LED Lighting Driver or Light Circuit Fault

E14 displayed and the refrigerator interior lights may flicker or remain off

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed LED driver on control board, Shorted LED module, Loose light harness connection

How to Fix / Troubleshooting

Safety first: Unplug the refrigerator before removing light covers or panels.

Step 1 – Check light modules:

Remove the light lens in the refrigerator and freezer compartments.
Inspect LED modules for burn marks or discoloration.

Step 2 – Test connections:

Ensure the light connectors are fully seated.
Wiggle the harness gently to see if the lights flicker (with power on, but only if you can do so safely and without touching live contacts).

Step 3 – Replace faulty LED module:

If a particular module is dark or visibly damaged, replace it with the correct part.

Step 4 – Check LED driver:

If all modules appear intact but none light, the LED driver circuit on the main board may have failed.
In that case, replacement of the main control board is usually required.

Repair Difficulty

Medium 3/5

Required Part

LED Light Module

Check Price on Amazon

We may earn a commission from links on this page.