FE error code on Café refrigerator; indicates freezer temperature fault (too warm or sensor issue).

Safety first: Disconnect power before removing freezer drawers or panels. Use caution around sharp metal edges and ice.

• 1. Confirm freezer temperature: Place a thermometer in the center of the freezer. After 20–30 minutes, check if temperature is above 5°F (-15°C). If normal, clear the code by unplugging for 5 minutes and restoring power.
• 2. Listen for the evaporator fan: With the freezer door closed for a few minutes and the compressor running, open the door and listen for a fan behind the rear panel. No sound may indicate a failed fan motor.
• 3. Check for frost buildup: Heavy frost on the rear freezer wall suggests a defrost problem. This can insulate the evaporator and cause warm temperatures.
• 4. Inspect thermistor connection: Locate the freezer thermistor (often clipped to the evaporator or liner). With power off, verify the connector is secure and not corroded.
• 5. Manual defrost (temporary fix): If frost is heavy, unplug the unit and leave doors open for 24 hours with towels to catch water. This may restore cooling temporarily but the underlying defrost issue must be repaired.
• 6. Professional service: If the fan motor, thermistor, or defrost components test bad, or if the control board is not sending power, a technician should perform component replacement.