Cecotec User Interface Failure

Display panel not responding to touch or button presses, but cooling continues.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Locked control panel (child lock), Loose ribbon cable, Failed touch sensor or UI PCB, Moisture damage behind panel

Safety: Unplug the refrigerator before removing the control panel.

Check for lock mode: Look for a lock icon and try the unlock procedure (press and hold the lock key for several seconds).
Inspect connections: Remove the panel and reseat the ribbon cable between the UI and main board.
Dry moisture: If condensation is present, dry the area thoroughly.
Replace UI board: If unresponsive after these steps, replace the Cecotec user interface PCB.

Medium 3/5

User Interface / Control Panel PCB

Check Price on Amazon

We may earn a commission from links on this page.