Cecotec Ice Maker Water Supply or Control Issue

Ice maker not producing ice, but water dispenser works normally.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Ice maker turned off via switch or control, Frozen fill tube to ice maker, Faulty ice maker fill valve section, Failed ice maker module

How to Fix / Troubleshooting

Safety: Unplug the refrigerator and close the water supply valve before working on the ice maker.

  • Check ice maker switch: Ensure the ice maker is turned on in the control panel or via the mechanical switch/arm.
  • Inspect fill tube: Look for ice blockage in the tube that feeds water to the ice maker. Clear it with warm water.
  • Test water fill: After restoring power and water, initiate an ice maker test cycle (if available) to see if it fills.
  • Replace components: If the fill valve coil for the ice maker is open or the ice maker does not cycle, replace the Cecotec dual water inlet valve or ice maker assembly as needed.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Ice Maker Assembly
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements