F1
Crosley
User Interface / Control Panel Fault
Display shows F1 and the refrigerator temperature setpoints cannot be adjusted or are not maintained.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed touchpad or button panel, Loose ribbon cable between UI and main board, Moisture intrusion into control panel
How to Fix / Troubleshooting
Safety: Unplug the refrigerator before removing the control panel or dispenser trim.
Steps:
- Inspect control panel: On Crosley models with a front control panel, gently pry off the trim and remove mounting screws to access the user interface board.
- Check ribbon cable: Ensure the flat ribbon cable or harness between the UI and main control is fully seated and not damaged.
- Dry moisture: If there are signs of condensation or liquid spills, carefully dry the area with a soft cloth. Do not use heat guns directly on electronics.
- Test buttons: With power restored, test each button. If some buttons are unresponsive or the F1 code remains, the UI board is likely faulty.
- Replace UI board: Install a Crosley-compatible user interface/control panel, reconnect the ribbon cable, and reassemble the trim.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
User Interface Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements