Display shows F8 and the refrigerator cycles erratically or does not respond to temperature changes.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed ambient thermistor (if equipped), Sensor wiring damage near control housing, Incorrect sensor placement

Safety: Unplug the refrigerator before accessing the control housing.

Steps:

Locate ambient sensor: Some Crosley models use an ambient thermistor near the control housing or grille to adjust operation based on room temperature.
Inspect sensor and wiring: Check for damage, loose connections, or dislodged sensor from its mounting clip.
Replace sensor: If the sensor is cracked or tests open/short with a multimeter, replace it with a Crosley-compatible ambient thermistor.
Reassemble and test: Restore power and monitor operation over 24 hours.

Medium 3/5

Ambient Thermistor

Check Price on Amazon

We may earn a commission from links on this page.